Follow this item and we’ll let you know when the price drops
Specifications & Dimensions
|Plumbing Connection:||Up to 1 in.|
|Capacity and Flow:_UP|
|Salt Storage Capacity (lbs.):||200|
|Water Flow Rate (gpm.):||7.3|
|General Warranty:||1 year limited parts and labor, 10 year limited tank|
|Household Size:||2 to 4|
|Iron Removal Setting:||Yes|
|Low Salt Light:||Yes|
|Regeneration Control System:||Water Meter|
|Salt Storage Tank Light:||No|
|Water Softener Type:||Salt-Based (Ion Exchange)|
|Power and Performance:|
|Hardness Capacity (grains):||24,300|
|Hardness/Salt Efficiency:||email@example.com lbs.|
|Operating Pressure Range (psi):||20 - 120|
|Regeneration Time (mins.):||125|
|Softener Resin (Cu.Ft.):||0.68|
Ratings & Reviews
Kenmore — trusted in the homes of more than 100 million Americans.
Kenmore water softeners remove hardness minerals so you can enjoy soft water benefits, saving you time, money and more. The Kenmore High-Efficiency Water Softener is a good choice for families up to 4 people with water hardness up to 35 grains per gallon.
- IntelliSoft2™ uses up to 20% less salt and 32% less water*
- High-flow valve
- Demand-initiated regeneration
- LCD screen for menu selection
- Third-party tested and certified by the National Sanitation Foundation (NSF)
- Installation accessories included
* Compared to Kenmore water softeners sold since 2001
Added on March 12, 2011
Overall, others give this:
Reviewers may have received a benefit, like a sweepstakes entry or rewards program points, in exchange for writing a review.
Those benefits were not conditioned on the positive or negative content of the review.
Most Helpful Reviews
Very pleased with this softener. We had a Sear water softener that had been left idle by the previous owner and need to be replaced. This new softener lined up perfectly with the plumbing and outlets we already had so installation was relatively simple. WE could feel the difference in the water immediately. Very pleased with purchase.
Snow Camp, NC
I down loaded the instructions before it arrived and the instructions were clear so that I had everything I needed to make the final connections. I did my own three valve bypass set up for service so the one with the unit was not used and could have been an accessory for someone handy like me. David W
After installing my water softener i had to wait a couple of day before i could tell the Difference in the water because our water is so hard . on the second day when taking my bath i could not believe the difference my hair was tangle free and shiny , My skin is really dry but after i took my bath for the first time i no longer needed after bath oil , lotion or anything . No more itchy skin , Laundry came out so clean and soft . I am a happy Sears Costomer
JUNK!!! I had a leak around the Venturi part which leaked water into the tank and screwed up the brine mix. I fought with the Sears help line until it was out of warranty and now I am stuck with their Junk. Yesterday their service tech suggested I must have dropped the unit. Really. Water @ 7 pounds per gallon plus salt, I think they are on dope!!! This weekend when I take it back, it may accidentally drop on the store floor. Terrible product and worse customer service. ***** here I come.
Palm Harbor, FL
I just not and installed this softener...it was a direct replacement of older kenmore. All the fittings are now 1" and we're 3/4"...about $50 worth of supplies. Maybe this works well if you are in a garage and can just plug it in..but if this is outside...be ready to carve a hole in your house to get the L shaped electrical hook ups through the walls. Other than that seems to be working well...painful install!
bought this softener on line with in store pick up. Was notified immediately, pick up was very efficient. This replaces a kenmore softener that had worked very well until the resin evidently plugged up, resulting in low water pressure. Tried the sears cleaner, which did not work at all. However, have been extremely pleased with kenmore softeners.
West Fargo, ND
Easy install, in a home that had not used a softener before. Efficiency of this softener beats out all others for the price @ 2870.58 Grains per Pound of Salt. Estimated salt cost at $80 a year.... works great.
Replaced an old Kenmore that had lasted 30 plus years. The spacing on the back of this is different than the old one, so if hard plumbed in, you may need to change the pipe spacing. I just bought a couple of those shark bite connector flex hoses, and plugged it right to the old lines after cutting the old unions off the old pipes. Generally, this seems a bit flimsy- little if any metal holding things together. Most internal plumbing is slip together, but it works, and that's what counts. The older softener plugged in with a regular power cord, and had a motor in the timer (which burned out, and thus the need to buy this one) while this one has a little power adapter which plugs in and a small thin wire that goes into the digital clock/ timer on the top. If you just leave it plugged in and doing its thing, it is fine. However, it is a bit more difficult than the old one in that you can't leave it unplugged (for safety and conservation) then just plug it in and run manually when you want. You can, but it is not quite as simple. Softening works well, and this is a basic unit that gets the job done.