Follow this item and we’ll let you know when the price drops
Specifications & Dimensions
|Dimensions and Capacity:|
|Cabinet Depth (in.):||15.75|
|Cabinet Height (in.):||12.5|
|Cabinet Width (in.):||16.25|
|Maximum Window Dimensions:||0|
|Minimum Window Dimensions:||0|
|24 Hour Timer:||Yes|
|Air Direction:||4-way: adjustable horizontal and vertical louvers|
|Power Cord Included:||Yes|
|Fan Type:||Blower wheel|
|Filter Material:||Polypropylene mesh|
|Filter Type:||Replaceable Filter|
|General Warranty:||1 year limited/ 5 year sealed system limited|
|No. of Cooling Speeds:||3|
|No. of Fan Only Speeds:||3|
|ENERGY STAR Compliant:||No|
|Power and Performance:|
|Energy Efficiency Rating:||10.7|
|Kilowatt Hrs. per Year:||0|
|Maximum Air Flow (CFM):||147|
|Rated Amps (Receptacle):||15|
|Room Coverage in Sq. Ft.:||150|
|Total Connected Load:||N/A|
Ratings & Reviews
The Kenmore 71063 room air conditioner fits slider and casement windows. It features electronic contorls, full-function remote and 4-way air direction control.
- 24 hour ON/OFF timer
- Sleep mode
- ENERGY STAR® rated
- Earth-friendly 410A Refrigerant
- Auto Cool with one touch-controls
- Filter check reminder
- Electronic controls with full-function remote
- Slide-out filter access
- 10.5 EER rating
Added on October 21, 2010
Overall, others give this:
This is probably not the model I would have bought if there was time to order and wait a week or two. My wife wanted the portable kind which sold out weeks before we wanted it, but she didn't want to go another night without AC in the middle of a heat wave.That being said, I am satisfied with model since it was a good match for our tiny bedroom and will probably save on electric bill since it doesn't put out 10,000 BTU's like the bigger ones. It does make noise as most AC's do, but at least it has a fan only feature which is not as loud if you put it on low. The remote comes with its own round lithium battery. This model is for slider windows, which made it a little easier to install since it comes with a bottom plate that screws into window sill. I actually got a good deal since there were a couple in the outlet area with a few missing parts that i didn't really need. Now it will help for the next round of heat in early October. We were lucky to find this one at 8 pm at a Sears in Carson when every else was sold out. I had it up and running by 10 pm.
Berrien Springs, MI
All our bedroom windows have a sliding frame that slides from left to right. We tried the standard window A/Cs which meant filling in the space above them with plexiglass and storing them from Fall through Spring. We bought two of these A/Cs and had them installed. They come with a panel to fill the space above them and they are permanently installed. They come with appropriate insulation which prevents loss of cooled air and bugs slipping through the unfilled spaces. Our daughter and grandchildren are spending a week in mid-summer and very delighted with the cooling, freedom from bugs, and the quiet operation.
I HAVE BEEN WATCHING THIS ITEM FOR ABOUT A YEAR. I HAVE COMPARED IT TO OTHER SLIDER WINDOW AIR CONDITIONERS ON THE MARKET. AFTER MUCH RESEARCH I DECIDED TO PURCHASE IT. WE ARE VERY HAPPY SO FAR WITH THIS AIR CONDITIONER. WE WOULD RECOMMEND IT TO A FRIEND.
Had it for about 2 weeks and it cools down a 220 Sqft bedroom very fast. Installation was straight-forward, all of the necessary mounts, brackets, screws, etc was included in the box. I find the energy saver function pretty useless as it completely shuts off the fan and cycles it every 10 minutes to determine the variation in temperature. You are better off setting the temperature at mid seventies and leaving the fan on auto. It also has a vent to bring fresh air from outside. I usually leave the vent Open at night and close it during the day. It uses 450 watts of power with AC on and fan set to high, 50-60 watts with fan only (Measured using Kill-a-watt).
Once unit is in place in the window, a safety bracket clips to front of the unit under the grill & a screw attaches the safety bracket to the mounting platform -SHOULD hold the unit in place esp if your window is too narrow to use the panel frame/side channel seal. This attachment is in the front of the unit & easily accessible, so is much easier to unscrew & remove unit from the window for winter/ repairs than the earlier model. HOWEVER screws provided for this attachment were significantly smaller in width than the hole in the platform which it was supposed to screw into - screw just slid in & out, minimizing safety. Purchased a wider screw that fit the holes to hold the unit firmly in place - would recommend careful attention when installing this unit. It does cool well, but is noisier than earlier model. Like the new adjust. fan speed w/ AC use. We used clear plexi in the open window space above the unit instead of the opaque plastic window panel provided
King of Prussia, PA
I bought this air conditioner instead of the regular window unit because my window slides horizontally and it works great. It cools the room within minutes and stays cool after shutdown. My room is small, approximately 150 sq ft. Installation took 45min and wasn't difficult. You will definitely need a 2nd person to help as the unit is ~60 lbs. It runs very quiet and has a timer, remote, energy save mode and digital readout. I definitely recommend this unit to anyone who has slider windows and needs to stay cool.
- Members Get 10% back in points on first $500 of each qualifying purchase with a Sears Card. Offer ends 25-Dec-2014 See details.
- Get Quarter ct tw Diamond Earrings for $24.99 with a purchase of $19.99 or more! Limit 1 per order Offer ends 27-Dec-2014 See details.
- Need it by December 24. Offer ends 24-Dec-2014 See details.